Minwax High Performance Wood Filler
Application
Interior/Exterior
Coast
It is designed for use with oil-based and water-based wood stains
Drying Time
2 hour - 6 hour
Cleanup
Water Cleanup
Minwax High Performance Wood Filler
The Miniwax high-performance wood filler comes in a 12-ounce can, and is an ideal choice for repairing, rebuilding, or restoring damaged or rotted wood. Very effective as a wood adhesive, the 2-part compound can be used to repair wooden decks, windowsills, tables, chairs, woodwork, doors, and also works great for anchoring screws or securing loose joints in furniture. Weather, water, and rot resistant, the wood filler strongly bonds to wood as well as almost any rigid surface including ceramics, concrete, metal, and fiberglass.
Description
How to use
-
- Depending on the size of the wood repair, scoop desired amount of wood filler from the can into the plastic lid and squeeze in a small amount of wood hardener from the tube, using approximately a 16:1 ratio of wood filler to wood hardener. Mix thoroughly for approximately 30 seconds or until you no longer see the white color of wood hardener. Mix only as much as can be used in 15 minutes.
- Apply the mixture immediately to the area to be repaired, using a plastic putty knife. Spread on a thin layer followed by a sufficient amount to fill the gap. (Note: To fill deep holes, spread on 1/8 inch thin layers one at a time until the hole is filled.) Slightly over-fil to allow for sanding down. Work quickly since the mixture remains workable for about 10 minutes at room temperature.
- After approximately 20 minutes, the repair should be hard enough to be carved and shaped using a sharp modeling knife. Wait at least 30 minutes to sand, plane, or file. NOTE: Once Minwax® High Performance Wood Filler has hardened, then it can be painted or stained. To stain wood filler, see directions inside cap sticker. This product absorbs stain differently than wood. It is unlikely that exact color match to the original wood will be achieved.
- Always wear high-quality chemical resistant rubber gloves and protective eyewear.
- Surface must be clean, dry and free from paint, varnish, dirt and grease.
- If working with rotted or soft wood, remove loose material and apply Minwax® High Performance Wood Hardener to strengthen wood fibers and to form a solid base for filling
Reviews (0)
Shipping & Delivery
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Related products
Minwax Teak Oil
Minwax Helmsman Teak Oil protects dense woods and enhances wood grain by penetrating into wood pores, restoring the wood's natural warmth and richness. Helmsman Teak Oil blocks moisture and UV rays, not for use on outdoor decks, below waterline wood surfaces, and interior floors. Apply with a brush or cloth, allow 30-60 minutes to dry between coats, and 6-8 hours before use.
View Color
ALTAX Resin varnish
A modern formula, a system of high-quality resins and high resistance to weather conditions. Thanks to the Resin Varnish, your wood will regain its shine very quickly!
View Color 
Minwax Clear Brushing Lacquer
Minwax Clear Brushing Lacquer is a beautiful, clear, durable protective wood finish. It is ideal for interior wood surfaces, and can be used over bare or stained wood. It dries to the touch in 30 minutes, ensuring a smooth, dust-free finish. Recoat in only two hours, with no sanding needed between coats. The finish flows evenly across the wood to provide a smooth surface. Once Minwax Clear Brushing Lacquer has been applied, another coat can be applied at any time without having to remove the old lacquer finish.
View Color
ALTAX priming impregnate
replaceable in protecting wooden garden furniture and other equipment, the 5 L Altax primer has an ultra-short drying time - only 24 H. Only one layer of 5 L Altax primer is enough to protect the wood against blue stain, fungi, mold and pests. Only one layer of the applied preparation is enough, and each type of wood will be deeply penetrated and protected without creating a coating on the surfaces. The main features of the 5 L Altax primer are:
Minwax® Interior Oil-Base Gloss Clear Wipe-On Wood Poly
Minwax Wipe-On Poly is a high quality, durable polyurethane finish that provides protection with a classic, hand-rubbed look. It delivers a hard, clear finish that protects wood against water, household chemicals, food stains, and wear. Wipe-On Poly is easy to apply. Just wipe it on with a cloth – No need to worry about drips or brush marks.
Minwax Polycrylic Water based Pro.Fin
Keep interior wood projects looking beautiful with Minwax Polycrylic Protective Finish. This crystal clear protective finish protects and adds beauty to woodwork, furniture, and more. The clear top coat protects against scratches, scuffs and blemishes to protect the wood surface beneath. This clear sealer dries crystal clear and stays crystal clear, making it ideal for use over all Minwax Oil-Based and Water-Based Stains and colors, as well as all wood species including light woods like maple, ash and birch. The ultra-fast-drying protective coating allows for quick recoats after 2 hours. It’s also easy to clean-up the clear wood finish with just soap and water. This protective wood top coat not only protects the natural beauty of the wood, but offers an attractive, classic sheen for a modern and subtle look. It’s also non-yellowing, non-ambering and low odor. Note: Minwax Polycrylic Protective Wood Finish may appear milky upon opening, but applies and dries to a crystal clear protective finish that lasts. Application:
View Color
ALTAX PROFI-LASUR PROTEKTOR
Decorative wood preservative with additional resins and waxes ALTAX Profi – Lasur Protector.
Intended for log and frame houses, roof coverings, gates, etc.
Special resins and waxes provide the maximum protection for wood against weathering.
The coating also becomes resistant to the appearance of fungi and mold.
View Color
Reviews
There are no reviews yet.