Sherwin-Williams FAUX IMPRESSIONS Metallic Latex Finish
Applications:
Faux Impressions Metallic Base is designed to be applied to the following surfaces: plaster, drywall, wood surfaces, surfaces previously treated with Sherwin-Williams primers.
Drying time:
At 25°C and humidity 50% "on peeling" - 1 hour, for applying the second layer - 4 hours. Sherwin-Williams decorative coatings remain suitable for finishing within 15 minutes after application.
Approximately
Approximately 10 m2/l depending on the surface and application.
Weight:
Weight: In a quart jar (1 quart = 0.946 l.) up to 1 kg.
Sherwin-Williams FAUX IMPRESSIONS Metallic Latex Finish
Artificial Impression Quartz Stone Basecoat is used as the first layer of Quartz Stone Decorative Coat. The unique texture of this paint improves the adhesion of the Quartz Stone decorative coating to the surface.
- Clean the surface with a suitable cleaner; rinse thoroughly with water and allow the surface to dry. Scrape or sand off old peeling or cracked paint. Sand glossy surfaces to a matte finish. Water, smoke, ink, pencil, grease stains, etc. Treat with a suitable primer/sealer. Drywall Fill cracks and holes with finishing putty and sand smooth. Joint fillers shall be machined and sanded to a smooth finish. Remove all dust generated during surface cleaning.
- Brick/masonry, concrete, cement, wall block All new surfaces must be cured in accordance with the manufacturer's recommendations, usually 30 days. Discard all extracts and reagents. Untreated rough surfaces can be installed with a smooth coating. If painting cannot be delayed for 30 days, allow the surface to cure for 7 days and then apply LoxonConcrete & MasonryPrimer. The plaster should be seasoned and hard. Textured, soft, porous, or crumbling plaster should be treated with a solution of 1 pint (0.47 L) of household vinegar and 1 gallon (3.785 L) of water. Repeat the treatment until the surface hardens, then rinse with clean water and dry.
- Wood Clean all exposed surfaces to fresh wood. Fill all holes and surface imperfections with wood filler or putty and sand until smooth. Mold Remove mold before painting with a solution of 1 part liquid bleach to 3 parts water. Apply the solution and scrape the moldy area. Leave the solution on the surface for 10 minutes. Then rinse the surface thoroughly with water and allow it to dry before painting. Wear safety glasses, waterproof gloves and protective clothing when working. Wash off the solution quickly if it comes into contact with the skin. Do not add detergent or ammonia to the bleach and water solution.
- Closing gaps Gaps between walls, ceilings, architectural profiles and other interior fittings can be filled after priming with a suitable sealant.
- Paint the corners with a brush. After that, while the coating is still wet, process the edges of the stained glass area with a mini roller from the corner to the center of the wall. Paint the rest of the wall surface with a 23 cm (9'') roller, smoothing the finished edges with the mini roller. Use a 16cm (61/4'') mini roller to apply an even layer along ceilings, corners and adjacent trim areas; brush marks can create a "picture frame" effect in the final surface finish. See label for more information and instructions.
- CLEANUP INFORMATION Remove paint spills and splashes immediately with soap and warm water. Wash your hands and tools with warm soapy water immediately after work.
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Reviews
There are no reviews yet.